NitLink Wiki
NitLink is a Windows capture card viewer that puts your console on your PC screen with HDR10, VRR, low latency, picture-in-picture, screenshots, recording and experimental frame generation.
NitLink Resources
Everything you need to download, set up, and tune NitLink for your console and capture card
Latest Updates
Discover the newest guides, tips, and content
NitLink no audio: Step-by-Step Windows Fix Guide
Fix NitLink no audio problems with a practical Windows troubleshooting guide covering capture paths, output devices, synchronization, and support reports.
NitLink reshade: Windows Setup Guide, Effects & Fixes
Learn how to approach NitLink reshade on Windows, configure the signal path, choose safe effects, and troubleshoot injection, HDR, and performance issues.
NitLink resolution not supported for resizing: Fix Guide
Fix the NitLink resolution not supported for resizing error with practical Windows, capture card, HDR, VRR, and display checks.
NitLink time ingest: Timing, Sync & Capture Setup
Learn how NitLink handles capture timing, frame pacing, VSync, VRR, HDR, and low-latency Windows viewing for a stable console signal.
NitLink frame generation: Performance Setup Guide & Tips
Learn how NitLink frame generation works, what hardware it needs, how to configure it, and how to balance smoother motion against added latency.
NitLink latency: Low-Delay Settings & Performance Tips
Tune NitLink latency with practical settings for low-latency viewing, frame pacing, VSync, Present Cap, VRR, and capture-card troubleshooting.
NitLink requirements: Windows Capture Card Setup Guide
Review NitLink requirements for Windows, capture cards, HDR10, VRR, WebView2, display setup, and low-latency console viewing.
NitLink scaler: Setup Guide for Clean Console Output
Learn how to configure NitLink scaler settings for aspect ratio, window size, HDR, VRR, and low-latency console viewing on Windows.
NitLink installation: Step-by-Step Windows Setup Guide
Follow this NitLink installation guide to download the official Windows release, connect a capture card, configure displays, and fix common setup issues.
NitLink performance: Low-Latency Setup & Tuning Guide
Tune NitLink performance with low-latency settings, VSync, Present Cap, VRR, HDR, frame generation, and practical Windows display tips.
NitLink nis upscaling: Setup Guide & Support Check
Check whether NitLink supports NIS upscaling, configure scaling correctly, and optimize HDR, VRR, latency, and frame presentation on Windows.
NitLink nis: Windows Setup Guide for HDR, VRR & More
Learn how to set up NitLink on Windows, connect a console capture card, configure HDR and VRR, reduce latency, and troubleshoot common display issues.
NitLink Download
NitLink is distributed for Windows through its official GitHub repository and Steam listing. Download the latest stable release from an official source, extract the archive, and launch NitLink.exe directly.
Use an Official Source
Download NitLink only from the official GitHub Releases page or the official Steam store listing. Avoid unofficial mirrors, modified packages, and republished executables.
Open Official ReleasesDownload the Windows Archive
Open the latest stable release and download the Windows package provided in the release assets. Save the archive locally before installation.
View ReleasesExtract and Launch
Extract the downloaded archive to a folder you can access easily, then run NitLink.exe. No separate installer workflow is required for the portable release package.
View ProjectCheck the Store Option
The Steam listing provides an additional official distribution option and a convenient way to keep the application available in your game library.
Open Steam ListingNitLink Setup Guide
NitLink works as a Windows viewing application for a console connected through a capture card. Prepare the signal path, confirm the Windows requirements, and then launch NitLink after the capture device is ready.
Connect the Console to the Capture Card
Connect the console HDMI output to the capture card HDMI input. Use the capture card's pass-through output for a television or monitor when you want to play on a separate display.
- Console HDMI output connected
- Capture card HDMI input connected
- Optional pass-through display connected
Connect the Capture Card to Windows
Connect the capture card to the Windows computer using its required USB or PCIe connection. Give Windows enough time to initialize the device before opening NitLink.
- Capture card powered
- USB or PCIe connection available
- Capture device recognized by Windows
Prepare the Windows Environment
Use a Windows system with a DirectX 11-capable GPU and Microsoft WebView2 available. These components support NitLink's rendering and interface experience.
- Windows PC ready
- DirectX 11-capable GPU
- WebView2 installed
Prepare the Display
For advanced display features, connect an HDR-capable display or a VRR-capable display as appropriate. Enable the desired display feature in Windows and on the monitor before testing.
- HDR display for HDR viewing
- VRR display for variable refresh
- Display mode configured in Windows
Launch NitLink and Select the Capture Signal
Start NitLink after the console and capture card are active. Select the available capture source, confirm that the video appears, and adjust the viewing mode to match your display.
- NitLink started
- Capture source selected
- Console image visible
NitLink Beginner Guide
NitLink lets you view a console signal captured on a Windows PC. Start with the video feed, then use the window, audio, screenshot, picture-in-picture, and full-screen controls to create the viewing setup that fits your desk.
Start with the Capture Feed
Connect the console and capture card, open NitLink, and choose the available capture source. The first goal is simply to confirm that the console image is visible in the application window.
- Turn on the console before selecting the source
- Check the HDMI path if no image appears
- Keep the capture card connected while NitLink starts
Use Window Mode
Keep NitLink in a resizable window when you want to monitor other applications, change settings, or keep the capture feed beside chat, recording, or streaming tools.
- Resize the window to fit your desktop
- Move the window to a secondary monitor
- Use window mode while testing the signal
Choose Audio Output
Select the audio output that matches your listening setup, such as the computer speakers, headphones, or another available Windows playback device.
- Connect headphones before choosing the output
- Check the Windows volume level
- Confirm that the selected device is active
Capture a Screenshot
Use NitLink's screenshot function to save a still image from the current capture feed. Screenshots are useful for sharing a game moment or documenting a display setup.
- Pause on the frame you want to save
- Keep the capture feed visible
- Check the saved image in your screenshots folder
Try Picture-in-Picture and Full Screen
Use picture-in-picture when you want the console feed to float above other windows. Switch to full screen when you want the capture image to occupy the display for a more direct viewing experience.
- Picture-in-picture is useful while multitasking
- Full screen is useful for focused viewing
- Return to window mode when changing other settings
NitLink Supported Capture Cards
Capture-card behavior depends on the device connection, supported input signal, Windows driver exposure, and display features. Use this overview to identify the hardware category that best matches your console, resolution, HDR, and VRR requirements.
USB UVC Capture Card
- Connection:
- USB
- Resolution:
- HD and 4K input variants depending on the model
- HDR Support:
- Model-dependent
- VRR Support:
- Model-dependent
- Expected Use:
- Portable setup and straightforward Windows connection
- What to Check:
- Check device availability in Windows before launching NitLink
PCIe Internal Capture Card
- Connection:
- PCIe
- Resolution:
- Depends on the installed model and signal mode
- HDR Support:
- Model-dependent
- VRR Support:
- Model-dependent
- Expected Use:
- Permanent desktop setup with an internal capture device
- What to Check:
- Check driver installation and capture-source visibility in Windows
4K Capture Card
- Connection:
- USB or PCIe
- Resolution:
- 4K input support depends on the model
- HDR Support:
- Available on supported models
- VRR Support:
- Confirm for the specific device and signal path
- Expected Use:
- High-resolution console capture and HDR-capable setups
- What to Check:
- Confirm input resolution, color format, HDR mode, and Windows capture availability
HDMI Pass-Through Capture Card
- Connection:
- USB or PCIe with HDMI in/out
- Resolution:
- Depends on input and pass-through specifications
- HDR Support:
- Model-dependent
- VRR Support:
- Model-dependent
- Expected Use:
- Viewing in NitLink while the console signal reaches a separate display
- What to Check:
- Confirm pass-through and capture output support the same console display mode
NitLink Low Latency Settings
NitLink low-latency settings control how quickly captured frames are presented and how consistently they are paced on screen. Competitive games benefit from the shortest presentation path, while 30fps console games and VRR displays may require synchronized timing instead.
Competitive Games
Use Low Latency mode with VSync disabled when minimum input-to-display delay is the priority. Match the display refresh rate to the highest stable output rate and avoid unnecessary frame caps.
- Low Latency: Enabled
- VSync: Disabled
- Refresh rate: Highest stable rate
- Present Cap: Uncapped or above source frame rate
Prioritize even frame pacing over maximum throughput. A presentation cap aligned with the 30fps source reduces uneven delivery and makes camera motion appear more consistent.
- Low Latency: Enabled
- VSync: Enabled when tearing is visible
- Refresh rate: A rate that divides evenly into the source cadence
- Present Cap: 30fps or an appropriate multiple
Use the display's variable refresh behavior to reduce tearing while preserving responsive presentation. Keep output inside the monitor's supported VRR range.
- Low Latency: Enabled
- VSync: Match the VRR display behavior
- Refresh rate: Maximum supported VRR rate
- Present Cap: Slightly below the VRR maximum when needed
Present Cap limits how frequently NitLink presents frames. Use it to match the source cadence, prevent unnecessary queueing, or keep output inside a VRR operating range.
- Match the cap to the source for stable pacing
- Raise the cap for additional responsiveness
- Lower the cap to give the display VRR headroom
NitLink HDR and VRR Guide
HDR output depends on the source signal, NitLink's pixel format, Windows HDR state, and the capabilities of the connected display. VRR is a separate timing feature that affects refresh synchronization, so both image format and display timing must be configured correctly.
NitLink Troubleshooting
Most NitLink problems can be narrowed down by checking the signal path, capture-device selection, display mode, and output format in sequence. Use the basic checks below before submitting a report with your hardware and configuration details.
NitLink Hotkeys and Configuration
NitLink separates quick runtime controls from persistent configuration. Use hotkeys and interface actions for immediate changes such as low-latency mode, HDR, VSync, picture-in-picture, aspect ratio, and HUD visibility, and use nitlink.json when you need a repeatable setup.
Low Latency
Display ModeRuntime + nitlink.json
Switch between a responsive presentation path and a more synchronized presentation behavior.
VSync
SynchronizationRuntime + nitlink.json
Control vertical synchronization when balancing tearing, frame pacing, and input response.
HDR
High Dynamic RangeRuntime + nitlink.json
Enable or disable HDR presentation when the source, Windows, and display support the same HDR workflow.
Picture-in-Picture
LayoutRuntime + nitlink.json
Show an additional source view while retaining the main NitLink presentation.
Aspect Ratio
LayoutRuntime + nitlink.json
Preserve or adjust the source image geometry so the picture is not unintentionally stretched.
HUD
OverlayRuntime + nitlink.json
Show or hide on-screen status information while using NitLink.
Display Pacing
Timingnitlink.json
Define repeatable frame-presentation behavior for stable output and consistent motion.
Refresh-Rate Limit
Timingnitlink.json
Set an output refresh ceiling that matches the display or keeps presentation inside a VRR range.
Present Cap
TimingRuntime + nitlink.json
Limit frame presentation frequency to match the source cadence or provide VRR headroom.
Audio Behavior
Audionitlink.json
Adjust repeatable audio handling when the capture path and display path produce different synchronization behavior.